+86 17307552869
yanyan@yanmisz.com
Our CNC Machining Capabilities
We operate almost every kind of CNC mill and turning center, and pride ourselves on being able to machine whatever you need, from simple, ‘as-machined’ work holdings to complex, organic geometries with tight tolerances. On request, we can also produce parts with EDM and grinders. Build envelopes, minimum feature sizes and design guidelines vary for milling and turning.
3 & 5 axis CNC Milling
We have over 30 milling machines, including standard 3-axis mills, indexed 3+2-axis mills & fully-continuous 5-axis mills.
-
Tolerances from ±0.017mm (0.0007 in)
-
Lead times from 5 business days
CNC Turning
We have over 3 turning machines, including Swiss lathes and multi-axis mill turns.
-
Tolerances from ±0.01mm (0.0004 in)
-
Lead times from 5 business days
CNC Machining Materials
We can generate instant machining quotes for 50+ metals and plastics.
Aluminum
Aluminum alloys have good strength-to-weight ratio, high thermal and electrical conductivity, low density and natural corrosion resistance. Can be anodized.
Alloys
A6061 | AlMgSi A5052 | AlMg2,5 A2017 | AlCu4MgSi A2014 | AlCu4SiMg A6063 | AlMg0,7Si A7075 | AlZn6CuMgZr A2024-T351 | 3.1355 | AlCu4Mg1 A7075-T6 | AlZn5,5MgCu A5083-H111 | 3.3547 | AlMg4.5Mn0.7 A6082 | AlSi1MgMn A6061-T6 | AlMg1SiCu
* We can source any other material on request, but quotes take up to 48 hours.
CNC Machining Surface Finishes
As machined (Ra 3.2μm / Ra 126μin)
As printed MJF parts are typically gray in color and have a smooth surface, without visible layers, and a powder texture.
Smooth machining (Ra 1.6μm / Ra 63μin)
Smooth machining is like an ‘As machined’ finish but with slightly less evident machine marks. Parts are machined at a lower feed, no hand polishing is applied.
.jpg)
Fine machining (Ra 0.8μm / Ra 32μin)
Finer-looking machining obtained either through higher-precision machines, lower feeds, sharper tools, or a combination of all the above. Machining marks are less evident.
Polishing (Ra 0.8μm / Ra 32μin)
Parts are manually polished in multiple directions. Surface is smooth and slightly reflective.
Electroless Nickel Plating
Parts are machined to Ra1.6µm and electroless nickel plated. Ideal for wear abrasion and corrosion resistance, not for cosmetic purposes.
Bead Blasted + Anodized type II (Glossy)
Parts are bead blasted, anodized type II and bright dipped. Results in glossy color. Ideal for cosmetic parts needing an increase in corrosion resistance.
As machined + Anodized type II
Parts are anodized (type II) directly after machining. The most cost-effective anodizing option; ideal for non-cosmetic, functional parts. Used to improve wear and corrosion resistance.
Chromate Conversion Coating
Parts are machined and a chromate conversion coating is applied. Ideal to increase the corrosion resistance of the part while maintaining its conductive properties. RoHS compliant.
Bead blasted + Anodized type II (Matte)
Parts are bead blasted and anodized type II. Ideal for increasing the corrosion resistance of the part. Results in naturally matte colors. For glossy colors, please select the bead blasted + glossy anodizing option.
Bead blasted
Parts are bead blasted with glass beads which results in a grainy texture and reduced machining marks.
Brushed + Electropolished (Ra 0.8μm / Ra 32μin)
Parts are brushed and electropolished. Ideal to reduce the micro-roughness of the part.
Black oxide
Applicable on steels, black oxide is a conversion coating used to improve corrosion resistance and minimize light reflection.
Gallery of CNC Machined Parts
We machine rapid prototypes and low-volume production orders for customers in multiple industries: automotive, electronics, hardware startups, industrial automation, machinery, manufacturing and robotics.
Put Your CNC Parts Into Production Today
🔒 All uploads are secure and confidential